A Salt Spray Test Chamber, also known as a Salt Fog Chamber or Salt Spray Tester, is a specialized laboratory equipment used to assess the corrosion resistance of various materials and surface coatings. This test is particularly important for evaluating the durability and performance of metals, paints, coatings, and other protective layers that are exposed to harsh environmental conditions, especially in marine or coastal environments.
The salt spray test is a widely accepted and standardized method for simulating corrosion caused by salt-laden environments. It helps manufacturers, researchers, and quality control professionals understand how different materials and coatings will withstand the effects of saltwater exposure over time.
How it works: The Salt Spray Test Chamber creates an environment where a saltwater mist, usually composed of a 5% sodium chloride (NaCl) solution, is continuously sprayed onto the test samples. The chamber’s temperature and humidity are controlled to maintain specific testing conditions, ensuring reproducibility and consistency.
The test samples are carefully prepared and placed inside the chamber, and the duration of the test can vary depending on the intended application and industry standards. The samples are then exposed to the corrosive salt spray, and the chamber’s environment is monitored throughout the testing period.
During and after the test, the samples’ appearance and performance are observed and analyzed to evaluate any signs of corrosion, such as rust, blistering, or color changes. Test results allow researchers and manufacturers to determine the materials’ corrosion resistance, assess the effectiveness of protective coatings, and make informed decisions about product quality and design improvements.
Applications: Salt Spray Test Chambers are commonly used in various industries, including automotive, aerospace, marine, electronics, and construction, where materials and coatings are susceptible to corrosion due to exposure to saltwater, humidity, and aggressive environmental conditions.
Features
Specifications
Model No | SI - SSC108 | SI - SSC150 | SI - SSC270 | SI - SSC400 |
---|---|---|---|---|
Capacity | 108 Liters | 150 Liters | 270 Liters | 400 Liters |
Inner Box Size (L x W x H) | 600 x 450 x 400 mm | 95 x 550 x 300 mm | 900 x 600 x 500 mm | 1200 x 850 x 500mm |
Temperature Range | 35°C~55°C | |||
Temperature Fluctuations | ≤±0.5°C | |||
Temperature Uniformity | ≤±2°C | |||
Temperature Precision | ±1°C | |||
Equipment Material | Both inside and outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board | |||
Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C |
|||
Brine Temperature | 35°C±1°C | |||
Spray Quantity | 1.0~2.0 ml / 80cm2 / hr | |||
pH value | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method (CASS)3.0~3.2 |
|||
Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over temperature protection, overload fuse protection | |||
Air pressure | 1 Kg | |||
Nozzle | Glass Nozzle | |||
Insulation | PVC | |||
Control Panel | PLC Based Control Panel | |||
Display | LCD Display | |||
Lid Cover | PVC | |||
Drainage | Solution and water drain out tap | |||
Atomizer | Glass | |||
Air Regulator | Precise regulator w/ gauge ranging from 0 - 50 psi | |||
Power Supply | AC220V,10A | AC220V,15A |
A Salt Spray Test Chamber, also known as a Salt Fog Chamber or Salt Spray Tester, is a specialized laboratory equipment used to assess the corrosion resistance of various materials and surface coatings. This test is particularly important for evaluating the durability and performance of metals, paints, coatings, and other protective layers that are exposed to harsh environmental conditions, especially in marine or coastal environments.
The salt spray test is a widely accepted and standardized method for simulating corrosion caused by salt-laden environments. It helps manufacturers, researchers, and quality control professionals understand how different materials and coatings will withstand the effects of saltwater exposure over time.
How it works: The Salt Spray Test Chamber creates an environment where a saltwater mist, usually composed of a 5% sodium chloride (NaCl) solution, is continuously sprayed onto the test samples. The chamber’s temperature and humidity are controlled to maintain specific testing conditions, ensuring reproducibility and consistency.
The test samples are carefully prepared and placed inside the chamber, and the duration of the test can vary depending on the intended application and industry standards. The samples are then exposed to the corrosive salt spray, and the chamber’s environment is monitored throughout the testing period.
During and after the test, the samples’ appearance and performance are observed and analyzed to evaluate any signs of corrosion, such as rust, blistering, or color changes. Test results allow researchers and manufacturers to determine the materials’ corrosion resistance, assess the effectiveness of protective coatings, and make informed decisions about product quality and design improvements.
Applications: Salt Spray Test Chambers are commonly used in various industries, including automotive, aerospace, marine, electronics, and construction, where materials and coatings are susceptible to corrosion due to exposure to saltwater, humidity, and aggressive environmental conditions.
Features:
Specifications
Model No | SI - SSC108 | SI - SSC150 | SI - SSC270 | SI - SSC400 |
---|---|---|---|---|
Capacity | 108 Liters | 150 Liters | 270 Liters | 400 Liters |
Inner Box Size (L x W x H) | 600 x 450 x 400 mm | 95 x 550 x 300 mm | 900 x 600 x 500 mm | 1200 x 850 x 500mm |
Temperature Range | 35°C~55°C | |||
Temperature Fluctuations | ≤±0.5°C | |||
Temperature Uniformity | ≤±2°C | |||
Temperature Precision | ±1°C | |||
Equipment Material | Both inside and outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board | |||
Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C |
|||
Brine Temperature | 35°C±1°C | |||
Spray Quantity | 1.0~2.0 ml / 80cm2 / hr | |||
pH value | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method (CASS)3.0~3.2 |
|||
Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over temperature protection, overload fuse protection | |||
Air pressure | 1 Kg | |||
Nozzle | Glass Nozzle | |||
Insulation | PVC | |||
Control Panel | PLC Based Control Panel | |||
Display | LCD Display | |||
Lid Cover | PVC | |||
Drainage | Solution and water drain out tap | |||
Atomizer | Glass | |||
Air Regulator | Precise regulator w/ gauge ranging from 0 - 50 psi | |||
Power Supply | AC220V,10A | AC220V,15A |
Samara Instruments is a trusted source for cutting-edge scientific equipment. We specialize in providing high-quality instruments and solutions for researchers, laboratories, and scientific professionals worldwide. With 8 years of industry experience, we are committed to delivering innovative products that empower scientific discovery and advancement.
A Salt Spray Test Chamber, also known as a Salt Fog Chamber or Salt Spray Tester, is a specialized laboratory equipment used to assess the corrosion resistance of various materials and surface coatings. This test is particularly important for evaluating the durability and performance of metals, paints, coatings, and other protective layers that are exposed to harsh environmental conditions, especially in marine or coastal environments.
The salt spray test is a widely accepted and standardized method for simulating corrosion caused by salt-laden environments. It helps manufacturers, researchers, and quality control professionals understand how different materials and coatings will withstand the effects of saltwater exposure over time.
How it works: The Salt Spray Test Chamber creates an environment where a saltwater mist, usually composed of a 5% sodium chloride (NaCl) solution, is continuously sprayed onto the test samples. The chamber's temperature and humidity are controlled to maintain specific testing conditions, ensuring reproducibility and consistency.
The test samples are carefully prepared and placed inside the chamber, and the duration of the test can vary depending on the intended application and industry standards. The samples are then exposed to the corrosive salt spray, and the chamber's environment is monitored throughout the testing period.
During and after the test, the samples' appearance and performance are observed and analyzed to evaluate any signs of corrosion, such as rust, blistering, or color changes. Test results allow researchers and manufacturers to determine the materials' corrosion resistance, assess the effectiveness of protective coatings, and make informed decisions about product quality and design improvements.
Applications: Salt Spray Test Chambers are commonly used in various industries, including automotive, aerospace, marine, electronics, and construction, where materials and coatings are susceptible to corrosion due to exposure to saltwater, humidity, and aggressive environmental conditions.
Model No | SI - SSC108 | SI - SSC150 | SI - SSC270 | SI - SSC400 |
---|---|---|---|---|
Capacity | 108 Liters | 150 Liters | 270 Liters | 400 Liters |
Inner Box Size (L x W x H) | 600 x 450 x 400 mm | 95 x 550 x 300 mm | 900 x 600 x 500 mm | 1200 x 850 x 500mm |
Temperature Range | 35°C~55°C | |||
Temperature Fluctuations | ≤±0.5°C | |||
Temperature Uniformity | ≤±2°C | |||
Temperature Precision | ±1°C | |||
Equipment Material | Both inside and outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board | |||
Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C |
|||
Brine Temperature | 35°C±1°C | |||
Spray Quantity | 1.0~2.0 ml / 80cm2 / hr | |||
pH value | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method (CASS)3.0~3.2 |
|||
Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over temperature protection, overload fuse protection | |||
Air pressure | 1 Kg | |||
Nozzle | Glass Nozzle | |||
Insulation | PVC | |||
Control Panel | PLC Based Control Panel | |||
Display | LCD Display | |||
Lid Cover | PVC | |||
Drainage | Solution and water drain out tap | |||
Atomizer | Glass | |||
Air Regulator | Precise regulator w/ gauge ranging from 0 - 50 psi | |||
Power Supply | AC220V,10A | AC220V,15A |